Description
One-part, quick-setting polyurethane foam
Description
EVERBUILDĀ®Ā FIX & FILL is a quick-setting one-part polyurethane foam in aerosol form. FIX & FILL is supplied with attachable nozzles. The foam expands on application up to 150 % its original volume. Once cured the foam can be cut, sawn or plastered over after only one hour providing the working temperatures (can and surfaces) are between +5 Ā°C to +30 Ā°C, ideally +20 Ā°C.
- Quick setting – can be cut, sawn or plastered in 1 hour.
- Economical in use – expands up to 55 times its original volume.
- Fills irregular and broad gaps where most conventional fillers would fail.
Overview
Usage
Filling
- Gaps around pipe entries through walls.
- Gaps around window frames, door frames.
- Electrical wire chasing prior to plastering.
- Deep joints prior to applying sealant or plaster.
- Irregular gaps in stone, brick, concrete or plaster.
FixingĀ
- Door frames.
- Timber structures.
- Window sills and thresholds.
- Window frames.
Insulating
- Behind cladding to exterior walls.
- Behind soffit and barge boards.
Advantages
- Quick setting – can be cut, sawn or plastered in 1 hour.
- Economical in use – expands up to 55 times its original volume.
- Fills irregular and broad gaps where most conventional fillers would fail.
- Possesses insulating and sound deadening properties.
ExpansionĀ 45Ā litres (750 ml can) 30 litresĀ (500 ml can)Ā Ā Ā Cell StructureĀ Medium fineĀ Temp Res Of Cured BeadĀ Long Term:Ā -40 to +80 Ā°C Short Term: -40 to +100 Ā°CBuilding Material ClassB3
